Specialty systems · NC Grade Level IV Installer · VA Master Alternative System Installer

Mound Septic Systems in Wake County, NC

When the native soil is too shallow or too wet to treat wastewater, a mound system builds the treatment area up. We construct engineered mounds exactly as permitted for homes across the Triangle and in Virginia.

What it is

Building good soil on top of the ground

A mound is a raised, engineered bed of specified sand and fill placed over the native ground, with a pressure-dosed distribution network inside it. Effluent is pumped up into the mound in measured doses, filters down through the sand, and finishes treatment in the native soil below.

The result is enough separation between your wastewater and a high water table, rock or restrictive layer for the system to work — on lots that would otherwise fail a conventional evaluation.

When a mound is typically required

  • High seasonal water table
  • Shallow soil over rock, saprolite or a restrictive layer
  • Soils too slow or too fast for conventional trenches
  • Replacement systems on lots with poor remaining soil

How we build it

Getting the details right

  1. Review your permitWe quote the exact fill, dimensions, pump tank and controls your permit specifies.
  2. Prepare the siteThe footprint is prepared without compacting the native soil, which the mound depends on.
  3. Build & doseSpecified sand, distribution network and cap are placed and the pump is set to the permitted dose.
  4. Finish & stabilizeThe mound is capped, topsoiled and stabilized so it sheds rain and establishes cover.

Owning one

Caring for a mound

  • Keep vehicles, livestock and heavy equipment off the mound.
  • Grass is ideal cover; avoid trees and deep-rooted shrubs.
  • Don't add soil or regrade around it, and keep roof and surface water directed away.
  • The pump, controls and alarm need periodic checks; the tank still needs pumping.

What it costs

Mound pricing starts with your permit

Typically $40,000 – $70,000

The biggest drivers are the volume of specified sand and fill that has to be hauled in and placed, the size of the mound, and the pump tank and controls that dose it. Access to the site and how far fill has to travel matter too.

The only way to get a real number is from your Construction Authorization (CA) permit. Send it to us and we'll return a written quote built from it.

Why Septic Innovations

Built exactly as permitted

A mound only works if the materials, dimensions and dosing match the design. We follow your permit to the letter and own the equipment to move the fill efficiently.

NC Grade Level IV InstallerVA Master Alternative System InstallerFamily-owned · Wake Forest, NCAvailable 24/7

Common questions

Mound septic system FAQs

Why does my lot need a mound system?
Usually because the natural soil doesn't give enough depth above a high water table, rock or a restrictive layer. The mound adds that treatment depth above ground.
Does a mound system need a pump?
Yes. Effluent has to be pumped up into the mound in measured doses, so mound systems include a pump tank, controls and an alarm.
How big is a mound?
It depends on your home's design flow and your soils, and it's set by your permit. Mounds are typically long and low, finished with topsoil and grass.
How much does a mound system cost?
Mound systems typically run $40,000 to $70,000. The amount of fill, the size of the mound and the pump tank and controls drive the price. Send your permit for an exact written quote.
Can I plant or build on the mound?
Grass is best. Avoid trees, gardens, structures, vehicles and anything that compacts or erodes the mound.

Related services

Permit calls for a mound?

Send it over for a written quote, or call or text and we'll walk you through what to expect.