Specialty systems · NC Grade Level IV Installer · VA Master Alternative System Installer

Drip Irrigation Septic Systems in Wake County, NC

Drip dispersal puts treated wastewater into the soil through small tubing just below the surface, a few gallons at a time. It works on slopes, shallow soils and wooded or irregular lots where conventional trenches won't fit.

What it is

Small doses, shallow and even

Instead of a few large gravel or chamber trenches, a drip system lays out a network of flexible tubing with built-in emitters, typically buried just inches below the ground. A pump and controller send effluent through a filter and into the tubing in small, timed doses, so the whole field shares the load evenly.

Because the tubing sits shallow and follows the contour of the land, drip can use the best soil on a lot — even on slopes or between trees — and often needs less disturbance than a conventional field. Many drip systems are paired with an aerobic treatment unit for pretreatment.

Sites where drip shines

  • Sloped or uneven lots
  • Shallow soil over rock or restrictive layers
  • Wooded lots where you want to save trees
  • Irregular or narrow usable areas
  • Sites where the only good soil is near the surface
  • Replacement systems with limited room

Key components

What makes up a drip system

Pump tank & controls

A dosing pump and programmable control panel meter effluent to the field and run alarms.

Filtration

Disc or screen filters keep the tiny emitters from clogging, with automatic or scheduled flushing.

Drip tubing & zones

Emitter tubing laid in zones across the field, with valves to rotate doses between them.

Pretreatment (often)

Many permits pair drip with an ATU or other treatment unit for cleaner effluent.

Brands we install

American Manufacturing, Geoflow and Norweco drip installers

Engineers often write the exact manufacturer into the permit. Whichever one yours names, we install it, start it up and service it.

American Manufacturing (Perc-Rite)

Perc-Rite drip systems for homes, small businesses and large commercial sites.

Geoflow

Geoflow drip tubing and components for residential and commercial drip fields.

Norweco

Norweco drip systems, often paired with Norweco treatment units.

How we do it

Install, program, maintain

  1. Review your permitWe quote exactly the layout, zones and components your permit specifies.
  2. Careful field layoutTubing is placed with minimal soil disturbance so the field keeps its absorption capacity.
  3. Program & testWe set dose volumes and timing, flush the lines, and test every alarm and zone.
  4. Keep it runningDrip systems need regular operator checks and filter service. We handle it under a maintenance contract.

Owning one

Living with a drip system

  • Keep vehicles and heavy equipment off the field — the tubing is shallow.
  • Don't till, plant trees or install fences over the zones.
  • Filters and flush cycles must be maintained or emitters can clog.
  • Your operation permit sets a required inspection schedule.

What it costs

Drip system pricing starts with your permit

Typically $40,000 and up

Drip systems include a pump tank, programmable controls, filtration and a zoned tubing field, and many permits also require an advanced treatment unit ahead of the drip field. The size of the field, the number of zones and whether pretreatment is required drive the price, and the range is wide.

The only way to get a real number is from your Construction Authorization (CA) permit. Send it to us and we'll return a written quote built from it.

Why Septic Innovations

The licenses and the know-how

Drip systems reward careful installation and punish shortcuts. We're licensed to install every system type permitted in NC and Virginia, and we stick around to service what we build.

NC Grade Level IV InstallerVA Master Alternative System InstallerFamily-owned · Wake Forest, NCAvailable 24/7

Common questions

Drip irrigation septic FAQs

Which drip system brands do you install?
We install all the major drip manufacturers in our area: American Manufacturing (Perc-Rite), Geoflow and Norweco. If your permit names one, send it over and we'll quote it.
Can I choose which drip brand I get?
Usually the engineer or designer specifies the manufacturer on the permit. If yours doesn't, we'll walk you through the options.
Is a drip septic system the same as lawn irrigation?
No. It uses similar-looking tubing, but it's a permitted wastewater dispersal system buried below the surface. It doesn't spray or water your lawn, and it's designed and dosed to treat effluent in the soil.
Why would my permit call for drip instead of regular trenches?
Usually because of slope, shallow soil, limited usable area or trees. Drip spreads small doses over shallow soil, so it can work where conventional trenches can't.
Does a drip system need maintenance?
Yes. Filters need cleaning, lines are flushed and the controls and alarms need checking, and the operation permit requires periodic inspections by a certified operator. Our maintenance contracts cover it.
How much does a drip septic system cost?
Drip systems typically start around $40,000 and go up from there. The field size, the number of zones and whether your permit requires an advanced treatment unit drive the price. Send your permit for an exact written quote.
Can I mow over a drip field?
Yes, mowing is fine. Avoid driving vehicles or heavy equipment on it, and don't dig, till or build over the zones.

Related services

Permit calls for drip?

Send it to us for a written quote built from your permit, or call or text with questions anytime.